When deciding how to build bunk beds, one of the first factors you need to consider is where they will go in your room. The style and size of the bunk beds will determine how much space you have to work with, but there are several options available that make it possible to create a bunk bed set up in any room of the house, regardless of size. Here are some tips on how to build bunk beds attached to the wall in any room.
Decide the location of the bunk bed
Bunk beds can’t be built any place you want. There are a few things to consider when deciding where to put your bunk bed. One of the most important considerations is where it will fit in your room and how much room there is for other furniture. The ceiling height also needs consideration when choosing a location for bunk beds because not all ceilings are enough to support bunk beds without purchasing a loft kit.
Many people build bunk beds attached to the wall to save space so they don’t take up floor space and give more room for other furniture. This design can work well in children’s rooms but may not be suitable for adults as it takes away from storage space and forces people into one area of the room.
Determine the dimensions of the bunk bed
Bunk beds in Canada are typically built with a standard size of 24 inches by 72 inches. The mattress height should be 12 inches, and the mattress thickness should be 6 inches for both bunk beds Canada. This will ensure enough space between both bunk beds in Canada for an adult person to sit or lie down comfortably.
You will need 2x4s, a plywood sheet, a drill and screwdriver, screws, a saw, and a hammer. For this project, you will need four 2x4s that are 8 feet long each and two 4-foot pieces of plywood. Drill two holes through each piece of 2×4 on one end that is 8 feet long, and then attach them using screws to create your foundation for the frame.
Cut out the lumber for the frame of the bunk bed
Cutting out the lumber for your frame is the first step. You need two pieces of 2×6 lumber and two pieces of 2×4 lumber. For a simple bunk bed, you will need 16 feet of lumber. Once you have all your materials together, start by cutting both lengths of 2×6 lumber into five-foot long pieces and then cut both lengths of 2×4 lumber into three-foot long pieces. You should now have four five-foot-long pieces and four three-foot-long pieces of wood. The next step is to assemble your frame, which is fairly straightforward.
Assemble the frame of the bunk bed
The first step in building a bunk bed is assembling the frame of the bunk bed. Make sure you measure your mattress before cutting any wood so the frame will be tall enough for your mattress. The length of baseboard should be at least 8 inches taller than your mattress, and it should be at least 4 inches wider than your mattress.
Cut two parallel 2x4s about 12 inches longer than your width, then cut two more 2x4s about 12 inches shorter than your width. You’ll need four of these boards altogether.
Attach the frame of the bunk bed to the wall
To attach your bunk bed frame to the wall:
- Use a stud finder and mark where you will drill. You will want to be sure that you are drilling at least 2 inches from any window or door frame.
- Place your frame against the wall, ensuring it is on level ground and flush with the bottom of the wall.
- Drill pilot holes into each stud (if no stud exists, screw in anchors).
- Drive a screw through each pilot hole until it is snug against both sides of the wood.
Add the mattress and bedding
The first step is to get your mattress and bedding. Depending on what you are looking for, there are many options for mattresses. For example, if you are looking for a more budget-friendly option, then something like a futon would be good, or if you want something more comfortable, then memory foam would be a better option.
The same goes for bedding. You can get sets or pieces individually, depending on what you want and how much money you want to spend. However, it’s always better to have a set because they usually come with sheets, saving you time and energy when it comes time to make your bed.
How are bunk beds attached?
Brackets and shelving are great ways to build bunk beds that attach to the wall. These brackets will be screwed into studs in your wall and then set onto equally spaced shelves. The shelves will be cut at an angle so that they can fit snugly against the back of your bed frame. This method is popular for those who want a clean, minimal look.
There are many benefits of building bunk beds that attach directly to your wall. Firstly, it can save you a lot of space because you do not have any bulky frames taking up space in your bedroom or hallway.
How do you anchor a bed to the wall?
Build a frame for your bed that is at least as tall as the wall. Start by screwing together two pieces of 2x4s in an X shape, which will form the top and bottom of your bed. It should be wide enough to slide one of the 4x4s into it. Screw this piece to the 4x2s with three screws on each side.
This will make a sturdy base for your bedframe and keep it from falling out of place while you work on it. You’ll want to line up all four corners before tightening any screws so that everything is at 90-degree angles with each other. If you have access to a saw, cut off excess 2x4s, so they are at least 12 inches shorter than your frame.
Final thoughts
Bunk beds are great because they provide a space-saving solution to help children feel more independent. However, getting them up off the ground can be tricky, and ensuring they are sturdy enough. We recommend building bunk beds that are attached to the wall for stability. This will also allow you to maximize your space by using vertical storage options like a shelving unit or bookcase underneath.
