There are benefits to using a counter-current swimming system. This is why some people would like to incorporate it into their pool. The type of counter-current swimming device installed in a swimming pool differs depending on whether the system is integrated or external. Pool masonry near me teaches you how to install a counter-current swimming system in this article.
The First Step is to Install the System Into the Masonry
The counter-current swimming system is installed at the conclusion of a building project. It can be installed in either an existing pool or a new pool. They are installed on plates that face the masonry. Plates are classified into two types.
Plates with right angles to the pool level and the top of the liner suspension profile (also called suspension). On the pool wall, but above the water level line, a straight mounting plate is installed. Screw it through the liner without fear of leaks.
The Second Step is to Figure Out How to Connect the Counter-current Swimming System to the Power Supply
Because it is completely submerged, the counter-current swimming system is designed to operate at a low voltage (30 V). The system includes a power box installed in the pool enclosure to provide power conversion.
A 3 m cable is also included with the turbine (24 mm section). A new cable is required to connect the turbine to the casing. The length of this cable is proportional to the distance between the turbine and the casing.
- 10 mm2 for lengths under 5 m
- 16 mm2 for lengths between 5 and 16 m
- 20 mm2 for lengths between 16 and 20 m
- 25 mm2 for lengths between 20 and 25 m
The cable at the fan outlet can be routed in a variety of ways. It is passable from ground level. The cable is connected to the frame first, then to a stainless steel tube installed in the base (supplied with the turbine). It can move beneath and above the water’s surface. To allow the cable to pass through walls and coverings, PVC pipes are provided.
Finally, it can pass beneath the foundation and the waterline. The cable is routed through a slot to a power outlet (not included) and a junction box (not included). The brush socket and the connection box are recommended tools for this operation.
Third Step: How Can the Depth of the Counter-current Swimming System Be Adjusted?
The third step in this installation guide is to determine the system’s depth. The depth of immersion determines how well the system works. The center of the mouth should be between 85 and 120 mm below the water’s surface.
It is critical to follow this advice because if the turbine is too deep, the flow will be weak. In contrast, if the turbine is too far away from the water’s surface, the quality of the water flow will suffer.
Several holes in the frame are drilled to vary the depth at which the turbine hangs. A mounting bracket with at least two pins and two nuts must be used to suspend the wind turbine.
What Are the Benefits of Using a Counter-current Swimming System?
Before deciding on a budget for the installation of a counter-current swimming system, you should be aware of the various benefits it provides. It is intended to make the installation process as simple and quick as possible.
Furthermore, all models include a technical manual to assist installers in understanding how to install the system and connect it to the electrical system. In any case, it is preferable to hire a professional to install such a system.
